Limit user traffic using PCQ (also useful for Hotspot Bypassed MAC address) – ISPbills

To limit all users 192.168.1.0/24 to 512kb epr user, using PCQ, use following script.

/queue type
add kind=pcq name=download-512kb pcq-burst-rate=0 pcq-burst-threshold=0 pcq-burst-time=10s pcq-classifier=dst-address pcq-dst-address-mask=32 pcq-dst-address6-mask=64 pcq-limit=50 pcq-rate=524288 \
pcq-src-address-mask=32 pcq-src-address6-mask=64 pcq-total-limit=2000
 
add kind=pcq name=upload-512kb pcq-burst-rate=0 pcq-burst-threshold=0 pcq-burst-time=10s pcq-classifier=src-address pcq-dst-address-mask=32 pcq-dst-address6-mask=64 pcq-limit=50 pcq-rate=524288 \
pcq-src-address-mask=32 pcq-src-address6-mask=64 pcq-total-limit=2000
 
/queue simple
add burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s comment="Limit every Users at 512kb using PCQ. Can be used for hotspot BYPASSED macs too. Can be used for multi purpose  Lupael" \
direction=both disabled=no interface=all limit-at=0/0 max-limit=0/0 name=512k-limit packet-marks="" parent=none priority=8 queue=upload-512kb/download-512kb target-addresses=192.168.1.0/24 \
total-queue=default-small

Change the Bandwidth and Target IP addresses to meet your local requirements.
Bandwidth example:
512k = 524288
1mb = 1048576
2mb = 2097152
4mb = 4194304

↓

Result as showed in the image below . . .

Related articles